water stops | water supply tubes | one piece riser and stop | toilet kits
lavatory kits |complete pedestal kits | offset bath supplies
water stops
replacement cross handles
|
D100-23 |
|
Part No.
|
Description/Size |
| D100-23 |
Cross handle only for water stops. |
|
|
|
|
IPS angle stops
| |
|
Part No.
|
Description/Size |
| D102 |
1/2˝ IPS inlet × 1/2˝ Slip Joint outlet. |
| D1021 |
1/2˝ IPS inlet × 1/2˝ OD Compression outlet. |
| D103 |
1/2˝ IPS inlet × 3/8˝ OD Compression outlet. |
| D106 |
3/8˝ IPS inlet × 3/8˝ OD Compression outlet. |
| D1061 |
3/8˝ IPS inlet × 1/2˝ OD Compression outlet. |
|
compression angle stops
| |
|
Part No.
|
Description/Size |
| D104 |
5/8˝ OD Comp. inlet (1/2˝ Nominal Copper) × 1/2˝ Slip Joint outlet. |
| D1041 |
5/8˝ OD Comp. inlet (1/2˝ Nominal Copper) × 1/2˝ OD Compression outlet. |
| D105 |
5/8˝ OD Comp. inlet (1/2˝ Nominal Copper) × 3/8˝ OD Compression outlet. |
|
back to top
angle stops with 5" copper extensions
 D1112 |
Part No.
|
Description/Size |
| D1112 |
1/2˝ Nominal Copper sweat inlet × 3/8˝ OD Compression outlet with no. D12912 11/16˝ bell flange. |
| D1113 |
1/2˝ Nominal Copper sweat inlet × 1/2˝ OD Compression outlet with no. D12912 11/16˝ bell flange. |
|
IPS straight stops
| |
|
Part No.
|
Description/Size |
| D107 |
1/2˝ IPS inlet × 3/8˝ OD Compression outlet. |
| D108 |
1/2˝ IPS inlet × 1/2˝ Slip Joint outlet. |
| D1081 |
1/2˝ IPS inlet × 1/2˝ OD Compression outlet. |
| D111 |
3/8˝ IPS inlet × 3/8˝ OD Compression outlet. |
| D1111 |
3/8˝ IPS inlet × 1/2˝ OD Compression outlet. |
|
compression straight stops
| |
|
Part No.
|
Description/Size |
| D109 |
5/8˝ OD inlet (1/2˝ Nominal Copper) × 3/8˝ OD Compression outlet. |
| D110 |
5/8˝ OD inlet (1/2˝ Nominal Copper) × 1/2˝ Slip Joint outlet. |
| D1101 |
5/8˝ OD inlet (1/2˝ Nominal Copper) × 1/2˝ OD Compression outlet. |
|
straight stops with 5" copper extensions
| |
Part No.
|
Description/Size |
| D1114 |
1/2˝ Nominal Copper Sweat inlet × 3/8˝ OD Compression outlet with no. D12912 11/16˝ bell flange. |
|
back to top
water supply tubes
corrugated risers
| D112 |
Part No.
|
Description/Size |
| D112 |
3/8˝ OD × 9˝ flexible riser. For lav & tank, 2 washers. |
| D113 |
3/8˝ OD × 12˝ flexible riser. For lav & tank, 2 washers. |
| D1131 |
3/8˝ OD × 15˝ flexible riser. For lav & tank, 2 washers. |
| D114 |
3/8˝ OD × 20˝ flexible riser. For lav & tank, 2 washers. |
| D115 |
1/2˝ OD × 9˝ flexible riser. For lav & tank, 2 washers. |
| D116 |
1/2˝ OD × 12˝ flexible riser. For lav & tank, 2 washers. |
| D117 |
1/2˝ OD × 15˝ flexible riser. For lav & tank, 2 washers. |
| D118 |
1/2˝ OD × 20˝ flexible riser. For lav & tank, 2 washers. |
|
|
braided risers
| D1141 |
Part No.
|
Description/Size |
| D1137 |
1/2˝ OD Comp. × 1/2˝ NPSM 20˝ Faucet. |
| D1138 |
1/2˝ OD Comp. × 1/2˝ NPSM 16˝ Faucet. |
| D1139 |
1/2˝ OD Comp. × 7/8˝ Ballcock 12” Toilet. |
| D1140 |
3/8˝ OD Comp. × 7/8˝ ballcock × 12˝ Toilet. |
| D1141 |
3/8˝ OD Comp × 1/2˝ NPSM 12” Faucet. |
| D1142 |
3/8˝ OD Comp.× 1/2˝ NPSM 20” Faucet. |
|
|
bullnose rigid risers
| D119 |
Part No.
|
Description/Size |
| D119 |
3/8˝ OD × 12˝ bullnose rigid supply tube for sink or lavatory. |
| D120 |
3/8˝ OD × 20˝ bullnose rigid supply tube, for sink or lavatory. |
| D1201 |
3/8˝ OD × 30˝ bullnose rigid supply tube, for sink or lavatory. |
| D121 |
1/2˝ OD × 12˝ bullnose rigid supply tube, for sink or lavatory. |
| D122 |
1/2˝ OD × 20˝ bullnose rigid supply tube, for sink or lavatory. |
| D1221 |
1/2˝ OD × 30˝ bullnose rigid supply tube, for sink or lavatory. |
| D140 |
1/2˝ OD × 36˝ rigid copper supply tube. |
| D141 |
3/8˝ OD × 36˝ rigid copper supply tube. |
|
|
flathead rigid risers
| D123 |
Part No.
|
Description/Size |
| D123 |
3/8˝ OD × 12˝ flat head rigid supply tube for toilet only. |
| D124 |
3/8˝ OD × 20˝ flat head rigid supply tube for toilet only. |
| D125 |
1/2˝ OD × 12˝ flat head rigid supply tube for toilet only. |
| D126 |
1/2˝ OD × 20˝ flat head rigid supply tube for toilet only. |
|
|
back to top
one piece riser and stop
compression angle stop
Stop with corrugated tube attached. Includes hardware to use with either toilet or lavatory.
| D145 |
Part No.
|
Description/Size |
| D145 |
Inlet 1/2” Nominal Compression with 3/8” OD x 9” attached flexible riser, and one no. D128 flange. |
| D146 |
Inlet 1/2” Nominal Compression with 3/8” OD x 12” attached flexible riser, and one no. D128 flange. |
| D147 |
Inlet 1/2” Nominal Compression with 3/8” OD x 15” attached flexible riser, and one no. D128 flange. |
| D148 |
Inlet 1/2” Nominal Compression with 3/8” OD x 20” attached flexible riser, and one no. D128 flange. |
|
|
IPS angle stop
Stop with corrugated tube attached. Includes hardware to use with either toilet or lavatory.
| D149 |
Part No.
|
Description/Size |
| D149 |
Inlet 1/2˝ IPS with 3/8 ˝ OD x 9˝ attached flexible riser, and one no. D129 flange. |
| D150 |
Inlet 1/2˝ IPS with 3/8 ˝ OD x 12˝ attached flexible riser, and one no. D129 flange. |
| D151 |
Inlet 1/2˝ IPS with 3/8 ˝ OD x 15˝ attached flexible riser, and one no. D129 flange. |
| D152 |
Inlet 1/2˝ IPS with 3/8 ˝ OD x 20 ˝ attached flexible riser, and one no. D129 flange. |
|
|
back to top
toilet kits
compression inlet with corrugated riser
Consists of one corrugated or rigid tube, one angle stop and one flange.
| D14512 |
Part No.
|
Description/Size |
| D161 |
1/2˝ Nominal Comp. inlet by 3/8 ” Comp outlet and 3/8 ˝ OD x 9˝ corrugated riser. Consists of D105 valve, D112 riser, and D128 flange. |
| D161X |
As above with cross handle. |
| D162 |
1/2˝ Nominal Comp. inlet by 3/8 ” Comp outlet and 3/8 ˝ OD x 12 ˝ corrugated riser. Consists of D105 valve, D113 riser, and D128 flange. |
| D162X |
As above with cross handle. |
| D163 |
1/2˝ Nominal Comp. inlet by 3/8 ” Comp outlet and 3/8 ˝ OD x 15 ˝ corrugated riser. Consists of D105 valve, D1131 riser, and D128 flange. Not available in 01-PVD polished brass. |
| D163X |
As above with cross handle. |
| D164 |
1/2˝ Nominal Comp. inlet by 3/8 ” Comp outlet and 3/8 ˝ OD x 20 ˝ corrugated riser. Consists of D105 valve, D114 riser, and D128 flange. Not available in 01-PVD polished brass. |
| D164X |
As above with cross handle. |
Part No.
|
Description/Size |
| D14512 |
1/2˝ Nominal Comp. inlet by 1/2” OD Comp outlet and 1/2˝ OD x 9˝ corrugated riser. Consists of D1041 valve, D115 riser, and D128 flange. |
| D14512X |
As above with cross handle. |
| D14612 |
1/2˝ Nominal Comp. inlet by 1/2˝ OD Comp outlet and 1/2” OD x 12˝ corrugated riser. Consists of D1041 valve, D116 riser, and D128 flange. |
| D14612X |
As above with cross handle. |
| D14712 |
1/2˝ Nominal Comp. inlet by 1/2˝ OD Comp. outlet and 1/2” OD x 15˝ corrugated riser. Consists of D1041 valve, D117 riser, and D128 flange. |
| D14712X |
As above with cross handle. |
| D14812 |
1/2˝ Nominal Comp. inlet by 1/2˝ OD Comp. outlet and 1/2” OD x 20˝ corrugated riser.Consists of D1041 valve, D118 riser, and D128 flange. |
| D14812X |
As above with cross handle. |
|
|
|
|
|
|
|
|
|
|
|
|
back to top
1/2" IPS inlet with corrugated riser
| D14912 |
Part No.
|
Description/Size |
| D14912 |
1/2˝ IPS inlet by 1/2˝ OD Comp. outlet and 1/2˝ OD x 9˝ corrugated riser. Consists of D1021 valve, D115 riser, and D129 flange. |
| D14912X |
As above with cross handle. |
| D15012 |
1/2˝ IPS inlet by 1/2˝ OD Comp. outlet and 1/2˝ OD x 12˝ corrugated riser. Consists of D1021 valve, D116 riser, and D129 flange. |
| D15012X |
As above with cross handle. |
| D15112 |
1/2˝ IPS inlet by 1/2˝ OD Comp. outlet and 1/2˝ OD x 15˝ corrugated riser. Consists of D1021 valve, D117 riser, and D129 flange. |
| D15112X |
As above with cross handle. |
| D15212 |
1/2˝ IPS inlet by 1/2˝ OD Comp. outlet and 1/2˝ OD x 20˝ corrugated riser. Consists of D1021 valve, D118 riser, and D129 flange. |
| D15212X |
As above with cross handle. |
|
|
|
|
|
compression inlet with solid riser
| D154 |
Part No.
|
Description/Size |
| D153 |
1/2˝ Nominal Comp. inlet × 3/8˝ OD Comp. outlet, with 3/8” OD x 20” flat head solid riser. Consists D105 valve, D124 Solid Riser and D128 flange. |
| D153X |
As above with cross handle. |
| D154 |
1/2˝ Nominal Comp. inlet × 1/2˝ OD Comp. outlet, with 1/2” OD x 20” flat head solid riser. Consists D1041 valve, D126 Solid Riser and D128 flange. |
| D154X |
As above with cross handle. |
|
|
IPS inlet with solid riser
| D155 |
Part No.
|
Description/Size |
| D155 |
1/2˝ IPS × 1/2˝ OD Comp. outlet with 1/2” OD x 20” flat head solid riser. Consists of D1021 valve, D126 riser, D1293 1/2”x 4” nipple D129 flange. |
| D155X |
As above with cross handle. |
| D156 |
3/8˝ IPS × 3/8 ˝ OD Comp. outlet with 3/8 ” OD x 20” flat head solid riser. Consists of D106 valve, D124 riser, D1292 3/8 ”x 4” nipple D127 flange. |
| D156X |
As above with cross handle. |
|
|
universal toilet kits
| D1712T |
Part No.
|
Description/Size |
| D1712T |
Universal Traditional-style Toilet Supply kit includes:
- One no. D116 1/2 OD × 12˝ corrugated riser.
- One no. D128 5/8˝ ID sure grip flange.
- One no. D129 1/2˝ IPS sure grip flange.
- One no. D1021X 1/2˝ IPS × 1/2˝ OD comp. angle stop with cross handle.
- One 1/2” IPS x 5/8” OD Comp. (1/2” Nominal Copper) adapter.
|
|
| |
| D1812T |
Part No.
|
Description/Size |
| D1812T |
Universal Traditional-style Toilet Supply kit includes:
- One no. D121 1/2˝ OD × 12˝ rigid flat head riser.
- One no. D128 5/8˝ ID sure grip flange.
- One no. D129 1/2˝ IPS sure grip flange.
- One no. D1021X 1/2˝ IPS × 1/2˝ OD comp. angle stop with cross handle.
- One 1/2” IPS x 5/8” OD Comp. (1/2” Nominal Copper) adapter.
|
|
back to top
lavatory kits
Consists of two rigid bullnose or Corrugated tubes, two angle stops and two flanges.
| D157 |
Part No.
|
Description/Size |
| D157 |
5/8” OD Comp. (1/2˝ Nominal Copper) inlet x 1/2˝ OD Comp. outlet. Consists of two D1041 valves, two D122 1/2”OD x 20” bullnose risers and two D128 sure grip flanges. |
| D157X |
As above with cross handle. |
| D158 |
5/8” OD Comp. (1/2˝ Nominal Copper) inlet x 1/2˝ OD Comp. outlet. Consists of two D105 valves, two D120 3/8” OD x 20” bullnose risers and two D128 sure grip flanges. |
| D158X |
As above with cross handle. |
| D159 |
1/2” IPS inlet x 1/2˝ OD Comp. outlet. Consists of two D1021 valves, two D122 1/2” OD x 20” bullnose risers, two D1293 Nipples and two D129 sure grip flanges. |
| D159X |
As above with cross handle. |
| D160 |
1/2˝ IPS × 3/8˝ OD outlet. Consists of two no. D103 valves, two no. D120 bullnose risers and two no. 1293 brass nipples and two no. 129 sure grip flanges |
| D160x |
As above with cross handle. |
| D165 |
3/8˝ IPS × 3/8˝ OD supply kit consists of two no. D106 valves
two no. D120 Risers, two no. D1292 nipples, two no. 127 flanges. |
| D165X |
As above with cross handle. |
| D167 |
1/2˝ compression x 3/8” OD outlet angle stop, 20” flexible riser and flange Consists of:
- two no. D105 valves
- two no. D114 corrugated risers
- two no. D128 flanges
|
| D167X |
As above with cross handle. |
|
| D159 |
| D167 |
| |
back to top
complete pedestal kits
Consists of two rigid or corrugated tubes, two angle stops, two flanges and a “P”-trap.
|
Part No.
|
Description/Size |
D1638L |
LA style pedestal kit includes:
- Two no. D114 3/8˝ × 20˝ corrugated risers
- Two no. D128 5/8˝ sure grip flanges
- Two no. D129 1/2˝ IPS sure grip flanges
- Two no. D103X 1/2˝ IPS × 3/8˝ OD comp. angle stop with cross handles
- One no. D402 1-1/2˝ × 1-1/2˝ LA style “P” trap
- One no. D522P 2˝ × 6˝ cover casing
- One no. D4094 2˝ high box flange
- Two IPS to compression adapter
- One 1-1/2˝ × 1-1/4˝ reducing washer
|
| |
| D1738L |
Victorian style pedestal kit includes:
- Two no. D114 3/8˝ × 20˝ corrugated risers
- Two no. D128 5/8˝ sure grip flanges
- Two no. D129 1/2˝ IPS sure grip flanges
- Two no. D103X 1/2˝ IPS × 3/8˝ OD comp. angle stop with cross handles
- One no. D400-1 1-1/2˝ × 1-1/2˝ “P” trap with high box flange
- Two IPS to compression adapter
- One 1-1/2˝ × 1-1/4˝ reducing washer
|
| |
| D1838L |
Traditional style pedestal kit includes:
- Two no. D120 3/8˝ × 20˝ rigid risers
- Two no. D128 5/8˝ sure grip flanges
- Two no. D129 1/2˝ IPS sure grip flanges
- Two no. D103X 1/2˝ IPS × 3/8˝ OD comp. angle stop with cross handles
- One no. D400-1 11/2˝ × 11/2˝ “P” trap with high box flange
- Two IPS to compression adapter
- One 11/2˝ × 11/4˝ reducing washer
|
| |
| D1938L |
Euro style pedestal kit includes:
- Two no. D120 3/8˝ × 20˝ rigid risers
- Two no. D128 5/8˝ sure grip flanges
- Two no. D129 1/2˝ IPS sure grip flanges
- Two no. D103X 1/2˝ IPS × 3/8˝ OD comp. angle stop with cross handles
- One no. D4053-1 11/4˝ × 11/4˝ European style “P” trap with high box flange
- Two IPS to compression adapter
|
|
| D1638L |
|
D1738L |
|
D1838L |
|
|
back to top
offset bath supplies
| D135 |
Part No.
|
Description/Size |
| D135 |
Single offset bath supply, set of two with nuts, washers, and bell flanges. Measures 1/2˝ OD × 22˝. |
| D136 |
Double offset bath supply, set of two with nuts, washers, and bell flanges. Measures 1/2˝ OD × 22˝. |
|
| D136 |
|
|
