air gaps | instant hot trim | hole covers | appliances | water dispensers
disposal trims | sink strainers | soap/lotion dispensers | bar strainers | log lighters
air gaps
standard air gaps
|
|
Part No.
|
Description/Size |
| D200 |
Air gap kit. Complete with brass cap. |
| D200-1 |
Air gap kit. Complete with brass cap. Cap covers entire top of air gap body. |
| D200F |
Air gap flange. |
| D201 |
Air gap cap only. Brass. Fits all standard air gaps. |
| D201-1 |
Air gap cap only. Cast brass. Fits all standard air gaps. Cap covers entire top of air gap body. |
|
|
D200-1 |
|
|
D200F |
D201 |
|
|
|
|
D201-1 |
|
|
combination air gaps
|
|
Part No.
|
Description/Size |
| D201CD |
Combination air gap/paper cup dispenser. Snap on type (includes air gap body). Uses 3 oz. cups. |
| D201ST |
Combination air gap/soap tray. Snap on type (includes air gap body). Perfect for soap, sponges and jewelry. |
| D2170P |
Combination air gap/soap lotion dispenser. All plastic. Snap on type (includes air gap body). Standard style. |
| D2171A |
Combination air gap/soap and lotion dispenser. Plastic body with brass head. Snap on type (includes air gap body). Heavy duty style. |
| D2172A |
Combination air gap/soap and lotion dispenser. Plastic body with brass head. Snap on type (includes air gap body). Victorian style. |
|
|
D201ST |
|
|
D2170P |
D2171A |
|
|
|
|
D2172A |
|
|
back to top
instant hot trim
|
|
Part No.
|
Description/Size |
| D206 |
In-Sink-Erator instant hot water dispenser model GN-3, spout unit only. |
| D207 |
In-Sink-Erator instant hot water dispenser, model HOT-1, includes spout unit and locking nut with Flange. |
|
|
|
|
back to top
hole covers
|
|
Part No.
|
Description/Size |
| D202 |
Brass kitchen sink hole cover 2˝ diameter. |
| D2021 |
1-hole cover plate for lavatory faucets. Covers 4˝ center holes. Length 6-1/4˝, width 2-1/2˝, center hole 1-3/8˝. Complete with gasket. |
| D2022 |
1-hole cover plate for kitchen faucets. Covers 8˝ center holes. Length 10-1/8˝, width 2-3/8˝, center hole 1-3/8˝ complete with gasket, mounting screws and washers. |
|
|
|
|
D2022 |
appliances
|
|
Part No.
|
Description/Size |
| ASB |
Dual Outlet remote on/off air switch. Brass flange & button. |
| QHT-1 |
Quick Heating Tank
Heating tank for water dispensers. Water heater tank must be sold with hot and cold water dispensers. |
| AGD-1 |
“All Gone I”
Waste disposer (all stainless steel). Continuous feed ½ H.P.
8 year In-Home Service Warranty |
| AGD-2 |
“All Gone II”
Waste disposer (all stainless steel). Continuous feed ¾ H.P.
10 year In-Home Service Warranty |
| AGD-3 |
“All Gone III”
Waste disposer (all stainless steel). Continuous feed 1 H.P.
Lifetime In-Home Service Warranty |
| FLT-1 |
Pure water filter operates without wasting water. Cleanable filter element for easy maintenance. Easy installation. NSF Certified system. ISO 9002 Quality Standard. Removes lead, aluminum and iron; bacteria; cysts. |
| FLT-R-1 |
Replacement filter for above. |
|
|
|
|
|
AGD-1 |
FLT-1 |
| |
|
back to top
water dispensers
purewater dispensers – spring piston style
|
|
Part No.
|
Description/Size |
| D203 |
Touch-Flo style water dispenser. Faucet part only. Standard 6˝ spout. With black tip and handle. |
| D203-8 |
Touch-Flo style water dispenser. Faucet part only. Standard 8˝ spout. With black tip and handle. |
| D2031 |
Touch-Flo style water dispenser. Faucet part only. 8˝ 45˚ spout. With black tip and handle. |
| D203W |
Touch-Flo style water dispenser. Faucet part only. Standard 6˝ spout. White tip and handle. With white tip and handle. |
| D2038-8W |
Touch-Flo style water dispenser. Faucet part only. Standard 8˝ spout. White tip and handle. |
| D2031W |
Touch-Flo style water dispenser. Faucet part only. 8˝ 45˚ spout. White tip and handle. |
|
|
|
| |
|
purewater dispensers – 1/4-turn ceramic disc
|
|
 |
Part No.
|
Description/Size |
| D2033 |
10-1/2˝ Victorian cold only water dispenser with lever handle. 1/4-turn ceramic disk cartridge. |
| D2034 |
As D2033 above with cross handle. |
| D2036 |
10˝ contemporary cold only water dispenser with lever handle. 1/4-turn ceramic disk cartridge. |
|
|
|
|
|
D2036 |
|
hot & cold water dispensers – 1/4-turn ceramic disc
Must be used with chiller and/or heating tank.
|
|
Part No.
|
Description/Size |
| D205 |
9-1/2˝ Victorian hot/cold water faucet. 1/4-turn ceramic disk cartridge. |
| D2051 |
9-1/2˝ contemporary hot/cold water faucet. 1/4-turn ceramic disk cartridge. |
|
|
|
bar faucets
|
|
Part No.
|
Description/Size |
| D205A |
9-1/2˝ Victorian hot/cold water faucet. 1/4-turn ceramic disk cartridge. For bar faucet. |
| D2051A |
9-1/2” Contemporary Hot/cold water faucet. 1/4-turn ceramic disk cartridge. For bar Faucet. |
|
|
|
hot water dispensers with auto off
|
|
Part No.
|
Description/Size |
| D261 |
Calorah - single handle classic hot water dispenser with auto-off handle function.
QHT-1 required for inastallation. |
| D271 |
Velosah - single handle contemporary hot water dispenser with auto-off handle function.
QHT-1 required for inastallation. |
|
|
D271 |
hot/cold water dispensers with auto off
|
|
Part No.
|
Description/Size |
| D262 |
Docalorah - two handle classic hot & cold water dispenser with auto-off hot and locking cold lever. QHT-1 required for installation. |
| D272 |
Develosah - two handle contemporary hot & cold water dispenser with auto-off hot and locking cold lever. QHT-1 required for installation. |
|
|
D272 |
back to top
disposal trims
|
|
Part No.
|
Description/Size |
| D209 |
In-Sink-Erator style disposal stopper. Brass. Fits all ISE models. Also fits Emerson, Kenmore and Grainger. |
| D208 |
In-Sink-Erator disopsal flange. Brass. Fits all ISE models. Also fits Emerson, Kenmore and Grainger. |
|
|
|
|
|
|
Part No.
|
Description/Size |
| D2089 |
In-Sink-Erator disposal flange and stopper. Brass. Fits all ISE models. Also fits Emerson, Kenmore and Grainger. |
|
| |
D2089 |
|
|
|
|
|
Part No.
|
Description/Size |
| D2081 |
Extra Deep In-Sink-Erator and 3 Bolt Mount Waste King Disposal Flange 2 5/8 deep. |
|
| |
D2081 |
|
|
|
|
|
Part No.
|
Description/Size |
| D2082 |
Stopper and D2081 Flange. |
|
| |
D2082 |
|
|
|
|
|
Part No.
|
Description/Size |
| D2091 |
Universal replacement flange and stopper for garbage disposals. Heavy duty Polypropelyne. Just push into existing disposal flange.
Only available in 50-white, 51-almond and 54-black. |
| D2091-1 |
Flange only for no. D2091. |
| D2091-2 |
Stopper only for no. D2091. |
|
| |
D2091 |
|
|
|
|
Part No.
|
Description/Size |
| D210 |
Waste King style disposal flange. Fits all 3 Bolt Models. |
| D211 |
Waste King style disposal stopper. Fits all 3 Bolt Models. |
|
|
|
|
|
|
|
Part No.
|
Description/Size |
| D212 |
Decorative disposal flange and stopper. Universal replacement for garbage disposals. Cast Brass. Just push into existing disposal flange. |
|
| |
D212 |
|
|
back to top
sink strainers
individual basket strainers
|
|
Part No.
|
Description/Size |
| D213 |
Large basket strainer, wing nut locking style, with nuts and washers. Solid brass. Fits 3-1/2˝ opening. |
| D213-1 |
Body only for no. D213, With nuts and washers. |
| D213-2 |
Basket only for no. D213 |
| D214 |
Large basket strainer, post style, with nuts and washers. Solid brass. Fits 31/2˝ opening. |
| D214-1 |
Body only for no. D214 With nuts and washers. |
| D214-2 |
Basket only for no. D214. |
| D2131 |
Large basket strainer, post style, with nuts and washers. Heavy duty polypropelyne.
Only available in 01-PVD polished brass, 07-satin nickel, 26-polished chrome, 50-white, 51-almond and 54-black. |
| D2131-1 |
Body only for no. D2131. |
| D2131-2 |
Basket only for no. D2131. |
|
|
|
|
|
D2131 |
|
two packs – basket strainers
|
|
Part No.
|
Description/Size |
| D2135 |
Two-pack of large basket strainers no. D213, wing nut locking style. Solid brass. |
| D2145 |
Two-pack of large basket strainers no. D214, post style. Solid brass. |
| D2265 |
Two-pack of large basket strainers no. D2131, post style. Heavy duty polypropylene.
Only available in 01-PVD polished brass, 07-satin nickel, 26-polished chrome, 50-white, 51-almond and 54-black. |
|
|
|
|
|
D2265 |
|
|
two packs – strainer & disposal
|
|
Part No.
|
Description/Size |
| D2155 |
Two-pack of large basket strainer no. D213, wing nut locking style and disposal flange and stopper no. D2089. Solid brass. |
| D2165 |
Two-pack of large basket strainer no. D214, post style and disposal flange and stopper no. D2089. Solid brass. |
|
|
|
|
back to top
soap/lotion dispensers
|
|
Part No.
|
Description/Size |
| D217 |
Standard soap and lotion dispenser. Solid brass. Spout is 43/4˝ high and 21/2˝ to center. Includes 12 oz. bottle. |
| D217-6 |
Head and pump only for no. D217. |
| D217-8 |
Pump only for no. D217. |
| D217-9 |
Bottle only for no. D217. |
| D2171 |
Heavy duty soap and lotion dispenser. Solid brass. Spout is 2-1/2˝ high and 3-1/2˝ to center. Includes 12 oz. bottle. |
| D2172 |
Victorian soap and lotion dispenser. Solid brass. Spout is 3˝ high and 4˝ to center. Includes 12 oz. bottle. |
| D2172-6 |
Head assembly and pump only for no. D2172. |
| D2172-8 |
Pump only for nos. D2171 and D2172. |
| D2172-9 |
Bottle only for nos. D2171 and D2172. |
| D2173 |
Victorian soap and lotion dispenser. Solid brass. Includes 2 porcelain inserts for top. One each reading “SOAP” and “LOTION.” Spout is 3-1/4˝ high and 4-1/4˝ to center.
Includes 12 oz. bottle.
|
 |
| D2172-EXT |
Extension kit for soap/lotion dispensers. 3˝ length. Allows for installation on thick countertops. |
|
|
|
|
|
D2172 |
D2173 |
| |
|
back to top
bar strainers
|
|
Part No.
|
Description/Size |
| D218 |
Junior basket strainer with nuts, solid brass. Fits 2-1/4˝ opening. Complete. |
| D219 |
Basket only for no. D218. Solid brass. |
| D2181 |
Junior basket strainer with nuts, washers and three prong strainer. Solid brass. Fits 2-1/4˝ opening. |
| D2182 |
Junior basket strainer with nuts and washers. Brass body only (no basket). Fits 2-1/4˝ opening. |
| D220 |
Midget duo strainer with nuts and washers. Solid brass. Fits 2-1/4˝ opening. |
| D2201 |
Body only for no. D220. |
| D2202 |
Basket only for no. D220. |
| D221 |
Sink strainer with brass nuts and grid. 21/2˝ long shank. |
| D221-B |
Sink strainer with brass nuts 21/2˝ long shank. Body only for no. D221. |
| D2213 |
Three prong strainer only for no. D221. |
|
|
|
|
|
D220 |
|
|
|